bigoli

Introduction

This page describes the installation of bigoli, which is my NZB server.

Procedure

1. Make note of the following volume creation commands:

   create-perfect-drbd-vol -v --remote=torchio --name=bigoli --size=5G \
       --name1=fiori --ip1=192.168.3.6 --name2=torchio --ip2=192.168.3.7
   create-perfect-drbd-vol -v --remote=torchio --name=bigoli_nzb --size=500G \
       --name1=fiori --ip1=192.168.3.6 --name2=torchio --ip2=192.168.3.7

   and the following container recreation commands:

   create-basic-lxc-cnt --remote=torchio --name=bigoli \
       --offset=700000 \
       --mem=2 \
       --disk=block:/dev/drbd_bigoli \
       --disk=block:/dev/drbd_bigoli_nzb \
       --nic=bridge:br0 \
       --nic=network:192.168.10.0
   

2. Complete Installing Debian 11 on an LXC container using the volume and container creation commands above when required.
3. Complete Configuring NZB services generation two.
4. Complete Finalising a Linux installation.

See also

• Computing