chifferi

Introduction

This page describes the installation of chifferi, which is my Check_MK server.

Procedure

1. Make note of the following volume creation commands:

   create-perfect-drbd-vol -v --remote=torchio --name=chifferi --size=10G \
       --name1=fiori --ip1=192.168.3.6 --name2=torchio --ip2=192.168.3.7

   and the following container recreation commands:

   create-basic-lxc-cnt --remote=torchio --name=chifferi \
       --offset=800000 \
       --cpus=2 \
       --mem=4 \
       --disk=block:/dev/drbd_chifferi \
       --nic=bridge:br0
   

2. Complete Installing Debian 11 on an LXC container using the volume and container creation commands above when required.
3. Complete Configuring monitoring services using Check_MK (revision 3).
4. Complete Finalising a Linux installation.

See also

• Computing